rclone/docs/content/commands/rclone_serve_docker.md

---
title: "rclone serve docker"
description: "Serve any remote on docker's volume plugin API."
versionIntroduced: v1.56
# autogenerated - DO NOT EDIT, instead edit the source code in cmd/serve/docker/ and as part of making a release run "make commanddocs"
---
# rclone serve docker

Serve any remote on docker's volume plugin API.

## Synopsis

This command implements the Docker volume plugin API allowing docker to use
rclone as a data storage mechanism for various cloud providers.
rclone provides [docker volume plugin](/docker) based on it.

To create a docker plugin, one must create a Unix or TCP socket that Docker
will look for when you use the plugin and then it listens for commands from
docker daemon and runs the corresponding code when necessary.
Docker plugins can run as a managed plugin under control of the docker daemon
or as an independent native service. For testing, you can just run it directly
from the command line, for example:

```console
sudo rclone serve docker --base-dir /tmp/rclone-volumes --socket-addr localhost:8787 -vv
```

Running `rclone serve docker` will create the said socket, listening for
commands from Docker to create the necessary Volumes. Normally you need not
give the `--socket-addr` flag. The API will listen on the unix domain socket
at `/run/docker/plugins/rclone.sock`. In the example above rclone will create
a TCP socket and a small file `/etc/docker/plugins/rclone.spec` containing
the socket address. We use `sudo` because both paths are writeable only by
the root user.

If you later decide to change listening socket, the docker daemon must be
restarted to reconnect to `/run/docker/plugins/rclone.sock`
or parse new `/etc/docker/plugins/rclone.spec`. Until you restart, any
volume related docker commands will timeout trying to access the old socket.
Running directly is supported on **Linux only**, not on Windows or MacOS.
This is not a problem with managed plugin mode described in details
in the [full documentation](https://rclone.org/docker).

The command will create volume mounts under the path given by `--base-dir`
(by default `/var/lib/docker-volumes/rclone` available only to root)
and maintain the JSON formatted file `docker-plugin.state` in the rclone cache
directory with book-keeping records of created and mounted volumes.

All mount and VFS options are submitted by the docker daemon via API, but
you can also provide defaults on the command line as well as set path to the
config file and cache directory or adjust logging verbosity.

# Restarting or upgrading the plugin

When the plugin is restarted (for example with
`docker plugin disable rclone && docker plugin enable rclone`, when upgrading
the plugin, or when the host reboots) rclone reads its `docker-plugin.state`
file and restores the volumes and mounts that were active before. The plugin
starts serving its socket straight away and re-establishes the mounts in the
background, so a slow or unreachable remote no longer prevents the plugin from
coming back up.

However, restarting the plugin necessarily stops and restarts the process that
serves the FUSE mounts. Any container that is **already running** and holding
files open on an rclone volume keeps a handle to the old, now dead mount, so
those handles start returning `transport endpoint is not connected` until the
container is restarted. This is a limitation of replacing the process behind a
live FUSE mount and cannot be avoided by rclone - the plugin itself recovers and
newly started containers work normally, but:

- **Restart any containers that were using rclone volumes** after you restart
  or upgrade the plugin (e.g. `docker restart <container>`), or stop them before
  and start them after.
- Databases and other applications that keep files open continuously (Grafana,
  Prometheus, SQLite-backed apps, etc.) are the most affected and should always
  be restarted.

# Security

The plugin API accepts a `remote` (aka `fs`) option on volume creation, and this
is parsed exactly like an rclone connection string. Connection strings are
trusted configuration: they may carry inline backend options, and some backends
use those options to run local commands (for example the `sftp` backend's `ssh`
option spawns an external binary). Anyone who can send requests to the plugin
socket can therefore make rclone run arbitrary commands as the user running
`rclone serve docker` (typically root). Treat access to the socket as equivalent
to that level of access and only expose it to trusted callers.

When listening on the default unix socket at `/run/docker/plugins/rclone.sock`
rclone creates it with mode `0660` owned by `root` and the group given by
`--socket-gid` (the process GID by default), so only root and members of that
group - normally just the docker daemon - can reach it. Do not loosen these
permissions or hand the group to untrusted users.

When using `--socket-addr` to listen on a TCP socket there is no authentication
and the API is reachable by anyone who can open the port, so bind it to a
loopback or otherwise trusted address and protect it with a firewall. Note that
holding Docker daemon access is already equivalent to root on the host, so a
caller able to issue `docker volume create` does not gain anything new from
this; the concern is exposing the socket more widely than the daemon itself.

## VFS - Virtual File System

This command uses the VFS layer. This adapts the cloud storage objects
that rclone uses into something which looks much more like a disk
filing system.

Cloud storage objects have lots of properties which aren't like disk
files - you can't extend them or write to the middle of them, so the
VFS layer has to deal with that. Because there is no one right way of
doing this there are various options explained below.

The VFS layer also implements a directory cache - this caches info
about files and directories (but not the data) in memory.

## VFS Directory Cache

Using the `--dir-cache-time` flag, you can control how long a
directory should be considered up to date and not refreshed from the
backend. Changes made through the VFS will appear immediately or
invalidate the cache.

```text
    --dir-cache-time duration   Time to cache directory entries for (default 5m0s)
    --poll-interval duration    Time to wait between polling for changes. Must be smaller than dir-cache-time. Only on supported remotes. Set to 0 to disable (default 1m0s)
```

However, changes made directly on the cloud storage by the web
interface or a different copy of rclone will only be picked up once
the directory cache expires if the backend configured does not support
polling for changes. If the backend supports polling, changes will be
picked up within the polling interval.

You can send a `SIGHUP` signal to rclone for it to flush all
directory caches, regardless of how old they are.  Assuming only one
rclone instance is running, you can reset the cache like this:

```console
kill -SIGHUP $(pidof rclone)
```

If you configure rclone with a [remote control](/rc) then you can use
rclone rc to flush the whole directory cache:

```console
rclone rc vfs/forget
```

Or individual files or directories:

```console
rclone rc vfs/forget file=path/to/file dir=path/to/dir
```

## VFS File Buffering

The `--buffer-size` flag determines the amount of memory,
that will be used to buffer data in advance.

Each open file will try to keep the specified amount of data in memory
at all times. The buffered data is bound to one open file and won't be
shared.

This flag is a upper limit for the used memory per open file.  The
buffer will only use memory for data that is downloaded but not not
yet read. If the buffer is empty, only a small amount of memory will
be used.

The maximum memory used by rclone for buffering can be up to
`--buffer-size * open files`.

## VFS File Caching

These flags control the VFS file caching options. File caching is
necessary to make the VFS layer appear compatible with a normal file
system. It can be disabled at the cost of some compatibility.

For example you'll need to enable VFS caching if you want to read and
write simultaneously to a file.  See below for more details.

Note that the VFS cache is separate from the cache backend and you may
find that you need one or the other or both.

```text
    --cache-dir string                     Directory rclone will use for caching.
    --vfs-cache-mode CacheMode             Cache mode off|minimal|writes|full (default off)
    --vfs-cache-max-age duration           Max time since last access of objects in the cache (default 1h0m0s)
    --vfs-cache-max-size SizeSuffix        Max total size of objects in the cache (default off)
    --vfs-cache-min-free-space SizeSuffix  Target minimum free space on the disk containing the cache (default off)
    --vfs-cache-poll-interval duration     Interval to poll the cache for stale objects (default 1m0s)
    --vfs-write-back duration              Time to writeback files after last use when using cache (default 5s)
```

If run with `-vv` rclone will print the location of the file cache.  The
files are stored in the user cache file area which is OS dependent but
can be controlled with `--cache-dir` or setting the appropriate
environment variable.

The cache has 4 different modes selected by `--vfs-cache-mode`.
The higher the cache mode the more compatible rclone becomes at the
cost of using disk space.

Note that files are written back to the remote only when they are
closed and if they haven't been accessed for `--vfs-write-back`
seconds. If rclone is quit or dies with files that haven't been
uploaded, these will be uploaded next time rclone is run with the same
flags.

If using `--vfs-cache-max-size` or `--vfs-cache-min-free-space` note
that the cache may exceed these quotas for two reasons. Firstly
because it is only checked every `--vfs-cache-poll-interval`. Secondly
because open files cannot be evicted from the cache. When
`--vfs-cache-max-size` or `--vfs-cache-min-free-space` is exceeded,
rclone will attempt to evict the least accessed files from the cache
first. rclone will start with files that haven't been accessed for the
longest. This cache flushing strategy is efficient and more relevant
files are likely to remain cached.

The `--vfs-cache-max-age` will evict files from the cache
after the set time since last access has passed. The default value of
1 hour will start evicting files from cache that haven't been accessed
for 1 hour. When a cached file is accessed the 1 hour timer is reset to 0
and will wait for 1 more hour before evicting. Specify the time with
standard notation, s, m, h, d, w .

You **should not** run two copies of rclone using the same VFS cache
with the same or overlapping remotes if using `--vfs-cache-mode > off`.
This can potentially cause data corruption if you do. You can work
around this by giving each rclone its own cache hierarchy with
`--cache-dir`. You don't need to worry about this if the remotes in
use don't overlap.

### --vfs-cache-mode off

In this mode (the default) the cache will read directly from the remote and write
directly to the remote without caching anything on disk.

This will mean some operations are not possible

- Files can't be opened for both read AND write
- Files opened for write can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files open for read with O_TRUNC will be opened write only
- Files open for write only will behave as if O_TRUNC was supplied
- Open modes O_APPEND, O_TRUNC are ignored
- If an upload fails it can't be retried

### --vfs-cache-mode minimal

This is very similar to "off" except that files opened for read AND
write will be buffered to disk.  This means that files opened for
write will be a lot more compatible, but uses the minimal disk space.

These operations are not possible

- Files opened for write only can't be seeked
- Existing files opened for write must have O_TRUNC set
- Files opened for write only will ignore O_APPEND, O_TRUNC
- If an upload fails it can't be retried

### --vfs-cache-mode writes

In this mode files opened for read only are still read directly from
the remote, write only and read/write files are buffered to disk
first.

This mode should support all normal file system operations.

If an upload fails it will be retried at exponentially increasing
intervals up to 1 minute.

### --vfs-cache-mode full

In this mode all reads and writes are buffered to and from disk. When
data is read from the remote this is buffered to disk as well.

In this mode the files in the cache will be sparse files and rclone
will keep track of which bits of the files it has downloaded.

So if an application only reads the starts of each file, then rclone
will only buffer the start of the file. These files will appear to be
their full size in the cache, but they will be sparse files with only
the data that has been downloaded present in them.

This mode should support all normal file system operations and is
otherwise identical to `--vfs-cache-mode` writes.

When reading a file rclone will read `--buffer-size` plus
`--vfs-read-ahead` bytes ahead.  The `--buffer-size` is buffered in memory
whereas the `--vfs-read-ahead` is buffered on disk.

When using this mode it is recommended that `--buffer-size` is not set
too large and `--vfs-read-ahead` is set large if required.

**IMPORTANT** not all file systems support sparse files. In particular
FAT/exFAT do not. Rclone will perform very badly if the cache
directory is on a filesystem which doesn't support sparse files and it
will log an ERROR message if one is detected.

### Fingerprinting

Various parts of the VFS use fingerprinting to see if a local file
copy has changed relative to a remote file. Fingerprints are made
from:

- size
- modification time
- hash

where available on an object.

On some backends some of these attributes are slow to read (they take
an extra API call per object, or extra work per object).

For example `hash` is slow with the `local` and `sftp` backends as
they have to read the entire file and hash it, and `modtime` is slow
with the `s3`, `swift`, `ftp` and `qinqstor` backends because they
need to do an extra API call to fetch it.

If you use the `--vfs-fast-fingerprint` flag then rclone will not
include the slow operations in the fingerprint. This makes the
fingerprinting less accurate but much faster and will improve the
opening time of cached files.

If you are running a vfs cache over `local`, `s3` or `swift` backends
then using this flag is recommended.

Note that if you change the value of this flag, the fingerprints of
the files in the cache may be invalidated and the files will need to
be downloaded again.

## VFS Chunked Reading

When rclone reads files from a remote it reads them in chunks. This
means that rather than requesting the whole file rclone reads the
chunk specified.  This can reduce the used download quota for some
remotes by requesting only chunks from the remote that are actually
read, at the cost of an increased number of requests.

These flags control the chunking:

```text
    --vfs-read-chunk-size SizeSuffix        Read the source objects in chunks (default 128M)
    --vfs-read-chunk-size-limit SizeSuffix  Max chunk doubling size (default off)
    --vfs-read-chunk-streams int            The number of parallel streams to read at once
```

The chunking behaves differently depending on the `--vfs-read-chunk-streams` parameter.

### `--vfs-read-chunk-streams` == 0

Rclone will start reading a chunk of size `--vfs-read-chunk-size`,
and then double the size for each read. When `--vfs-read-chunk-size-limit` is
specified, and greater than `--vfs-read-chunk-size`, the chunk size for each
open file will get doubled only until the specified value is reached. If the
value is "off", which is the default, the limit is disabled and the chunk size
will grow indefinitely.

With `--vfs-read-chunk-size 100M` and `--vfs-read-chunk-size-limit 0`
the following parts will be downloaded: 0-100M, 100M-200M, 200M-300M, 300M-400M
and so on. When `--vfs-read-chunk-size-limit 500M` is specified, the result would
be 0-100M, 100M-300M, 300M-700M, 700M-1200M, 1200M-1700M and so on.

Setting `--vfs-read-chunk-size` to `0` or "off" disables chunked reading.

The chunks will not be buffered in memory.

### `--vfs-read-chunk-streams` > 0

Rclone reads `--vfs-read-chunk-streams` chunks of size
`--vfs-read-chunk-size` concurrently. The size for each read will stay
constant.

This improves performance performance massively on high latency links
or very high bandwidth links to high performance object stores.

Some experimentation will be needed to find the optimum values of
`--vfs-read-chunk-size` and `--vfs-read-chunk-streams` as these will
depend on the backend in use and the latency to the backend.

For high performance object stores (eg AWS S3) a reasonable place to
start might be `--vfs-read-chunk-streams 16` and
`--vfs-read-chunk-size 4M`. In testing with AWS S3 the performance
scaled roughly as the `--vfs-read-chunk-streams` setting.

Similar settings should work for high latency links, but depending on
the latency they may need more `--vfs-read-chunk-streams` in order to
get the throughput.

## VFS Performance

These flags may be used to enable/disable features of the VFS for
performance or other reasons. See also the [chunked reading](#vfs-chunked-reading)
feature.

In particular S3 and Swift benefit hugely from the `--no-modtime` flag
(or use `--use-server-modtime` for a slightly different effect) as each
read of the modification time takes a transaction.

```text
    --no-checksum     Don't compare checksums on up/download.
    --no-modtime      Don't read/write the modification time (can speed things up).
    --no-seek         Don't allow seeking in files.
    --read-only       Only allow read-only access.
```

Sometimes rclone is delivered reads or writes out of order. Rather
than seeking rclone will wait a short time for the in sequence read or
write to come in. These flags only come into effect when not using an
on disk cache file.

```text
    --vfs-read-wait duration   Time to wait for in-sequence read before seeking (default 20ms)
    --vfs-write-wait duration  Time to wait for in-sequence write before giving error (default 1s)
```

When using VFS write caching (`--vfs-cache-mode` with value writes or full),
the global flag `--transfers` can be set to adjust the number of parallel uploads
of modified files from the cache (the related global flag `--checkers` has no
effect on the VFS).

```text
    --transfers int  Number of file transfers to run in parallel (default 4)
```

## Symlinks

By default the VFS does not support symlinks. However this may be
enabled with either of the following flags:

```text
    --links      Translate symlinks to/from regular files with a '.rclonelink' extension.
    --vfs-links  Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
```

As most cloud storage systems do not support symlinks directly, rclone
stores the symlink as a normal file with a special extension. So a
file which appears as a symlink `link-to-file.txt` would be stored on
cloud storage as `link-to-file.txt.rclonelink` and the contents would
be the path to the symlink destination.

Note that `--links` enables symlink translation globally in rclone -
this includes any backend which supports the concept (for example the
local backend). `--vfs-links` just enables it for the VFS layer.

This scheme is compatible with that used by the
[local backend with the --local-links flag](/local/#symlinks-junction-points).

The `--vfs-links` flag has been designed for `rclone mount`, `rclone
nfsmount` and `rclone serve nfs`.

It hasn't been tested with the other `rclone serve` commands yet.

A limitation of the current implementation is that it expects the
caller to resolve sub-symlinks. For example given this directory tree

```text
.
├── dir
│   └── file.txt
└── linked-dir -> dir
```

The VFS will correctly resolve `linked-dir` but not
`linked-dir/file.txt`. This is not a problem for the tested commands
but may be for other commands.

**Note** that there is an outstanding issue with symlink support
[issue #8245](https://github.com/rclone/rclone/issues/8245) with duplicate
files being created when symlinks are moved into directories where
there is a file of the same name (or vice versa).

## VFS Case Sensitivity

Linux file systems are case-sensitive: two files can differ only
by case, and the exact case must be used when opening a file.

File systems in modern Windows are case-insensitive but case-preserving:
although existing files can be opened using any case, the exact case used
to create the file is preserved and available for programs to query.
It is not allowed for two files in the same directory to differ only by case.

Usually file systems on macOS are case-insensitive. It is possible to make macOS
file systems case-sensitive but that is not the default.

The `--vfs-case-insensitive` VFS flag controls how rclone handles these
two cases. If its value is "false", rclone passes file names to the remote
as-is. If the flag is "true" (or appears without a value on the
command line), rclone may perform a "fixup" as explained below.

The user may specify a file name to open/delete/rename/etc with a case
different than what is stored on the remote. If an argument refers
to an existing file with exactly the same name, then the case of the existing
file on the disk will be used. However, if a file name with exactly the same
name is not found but a name differing only by case exists, rclone will
transparently fixup the name. This fixup happens only when an existing file
is requested. Case sensitivity of file names created anew by rclone is
controlled by the underlying remote.

Note that case sensitivity of the operating system running rclone (the target)
may differ from case sensitivity of a file system presented by rclone (the source).
The flag controls whether "fixup" is performed to satisfy the target.

If the flag is not provided on the command line, then its default value depends
on the operating system where rclone runs: "true" on Windows and macOS, "false"
otherwise. If the flag is provided without a value, then it is "true".

The `--no-unicode-normalization` flag controls whether a similar "fixup" is
performed for filenames that differ but are [canonically
equivalent](https://en.wikipedia.org/wiki/Unicode_equivalence) with respect to
unicode. Unicode normalization can be particularly helpful for users of macOS,
which prefers form NFD instead of the NFC used by most other platforms. It is
therefore highly recommended to keep the default of `false` on macOS, to avoid
encoding compatibility issues.

In the (probably unlikely) event that a directory has multiple duplicate
filenames after applying case and unicode normalization, the `--vfs-block-norm-dupes`
flag allows hiding these duplicates. This comes with a performance tradeoff, as
rclone will have to scan the entire directory for duplicates when listing a
directory. For this reason, it is recommended to leave this disabled if not
needed. However, macOS users may wish to consider using it, as otherwise, if a
remote directory contains both NFC and NFD versions of the same filename, an odd
situation will occur: both versions of the file will be visible in the mount,
and both will appear to be editable, however, editing either version will
actually result in only the NFD version getting edited under the hood. `--vfs-block-
norm-dupes` prevents this confusion by detecting this scenario, hiding the
duplicates, and logging an error, similar to how this is handled in `rclone
sync`.

## VFS Disk Options

This flag allows you to manually set the statistics about the filing system.
It can be useful when those statistics cannot be read correctly automatically.

```text
    --vfs-disk-space-total-size    Manually set the total disk space size (example: 256G, default: -1)
```

## Alternate report of used bytes

Some backends, most notably S3, do not report the amount of bytes used.
If you need this information to be available when running `df` on the
filesystem, then pass the flag `--vfs-used-is-size` to rclone.
With this flag set, instead of relying on the backend to report this
information, rclone will scan the whole remote similar to `rclone size`
and compute the total used space itself.

**WARNING**: Contrary to `rclone size`, this flag ignores filters so that the
result is accurate. However, this is very inefficient and may cost lots of API
calls resulting in extra charges. Use it as a last resort and only with caching.

## VFS Metadata

If you use the `--vfs-metadata-extension` flag you can get the VFS to
expose files which contain the [metadata](/docs/#metadata) as a JSON
blob. These files will not appear in the directory listing, but can be
`stat`-ed and opened and once they have been they **will** appear in
directory listings until the directory cache expires.

Note that some backends won't create metadata unless you pass in the
`--metadata` flag.

For example, using `rclone mount` with `--metadata --vfs-metadata-extension .metadata`
we get

```console
$ ls -l /mnt/
total 1048577
-rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G

$ cat /mnt/1G.metadata
{
        "atime": "2025-03-04T17:34:22.317069787Z",
        "btime": "2025-03-03T16:03:37.708253808Z",
        "gid": "1000",
        "mode": "100664",
        "mtime": "2025-03-03T16:03:39.640238323Z",
        "uid": "1000"
}

$ ls -l /mnt/
total 1048578
-rw-rw-r-- 1 user user 1073741824 Mar  3 16:03 1G
-rw-rw-r-- 1 user user        185 Mar  3 16:03 1G.metadata
```

If the file has no metadata it will be returned as `{}` and if there
is an error reading the metadata the error will be returned as
`{"error":"error string"}`.

```
rclone serve docker [flags]
```

## Options

```
      --allow-idmap                            Allow id-mapped mounts (Linux 6.12+, mount2 only)
      --allow-non-empty                        Allow mounting over a non-empty directory (not supported on Windows)
      --allow-other                            Allow access to other users (not supported on Windows)
      --allow-root                             Allow access to root user (not supported on Windows)
      --async-read                             Use asynchronous reads (not supported on Windows) (default true)
      --attr-timeout Duration                  Time for which file/directory attributes are cached (default 1s)
      --base-dir string                        Base directory for volumes (default "/var/lib/docker-volumes/rclone")
      --daemon                                 Run mount in background and exit parent process (as background output is suppressed, use --log-file with --log-format=pid,... to monitor) (not supported on Windows)
      --daemon-timeout Duration                Time limit for rclone to respond to kernel (not supported on Windows) (default 0s)
      --daemon-wait Duration                   Time to wait for ready mount from daemon (maximum time on Linux, constant sleep time on OSX/BSD) (not supported on Windows) (default 1m0s)
      --debug-fuse                             Debug the FUSE internals - needs -v
      --default-permissions                    Makes kernel enforce access control based on the file mode (not supported on Windows)
      --devname string                         Set the device name - default is remote:path
      --dir-cache-time Duration                Time to cache directory entries for (default 5m0s)
      --dir-perms FileMode                     Directory permissions (default 777)
      --direct-io                              Use Direct IO, disables caching of data
      --file-perms FileMode                    File permissions (default 666)
      --forget-state                           Skip restoring previous state
      --fuse-flag stringArray                  Flags or arguments to be passed direct to libfuse/WinFsp (repeat if required)
      --gid uint32                             Override the gid field set by the filesystem (not supported on Windows) (default 1000)
  -h, --help                                   help for docker
      --link-perms FileMode                    Link permissions (default 666)
      --max-read-ahead SizeSuffix              The number of bytes that can be prefetched for sequential reads (not supported on Windows) (default 128Ki)
      --mount-case-insensitive Tristate        Tell the OS the mount is case insensitive (true) or sensitive (false) regardless of the backend (auto) (default unset)
      --network-mode                           Mount as remote network drive, instead of fixed disk drive (supported on Windows only)
      --no-checksum                            Don't compare checksums on up/download
      --no-modtime                             Don't read/write the modification time (can speed things up)
      --no-seek                                Don't allow seeking in files
      --no-spec                                Do not write spec file
      --noappledouble                          Ignore Apple Double (._) and .DS_Store files (supported on OSX only) (default true)
      --noapplexattr                           Ignore all "com.apple.*" extended attributes (supported on OSX only)
  -o, --option stringArray                     Option for libfuse/WinFsp (repeat if required)
      --poll-interval Duration                 Time to wait between polling for changes, must be smaller than dir-cache-time and only on supported remotes (set 0 to disable) (default 1m0s)
      --read-only                              Only allow read-only access
      --socket-addr string                     Address <host:port> or absolute path (default: /run/docker/plugins/rclone.sock)
      --socket-gid int                         GID for unix socket (default: current process GID) (default 1000)
      --uid uint32                             Override the uid field set by the filesystem (not supported on Windows) (default 1000)
      --umask FileMode                         Override the permission bits set by the filesystem (not supported on Windows) (default 002)
      --vfs-block-norm-dupes                   If duplicate filenames exist in the same directory (after normalization), log an error and hide the duplicates (may have a performance cost)
      --vfs-cache-max-age Duration             Max time since last access of objects in the cache (default 1h0m0s)
      --vfs-cache-max-size SizeSuffix          Max total size of objects in the cache (default off)
      --vfs-cache-min-free-space SizeSuffix    Target minimum free space on the disk containing the cache (default off)
      --vfs-cache-mode CacheMode               Cache mode off|minimal|writes|full (default off)
      --vfs-cache-poll-interval Duration       Interval to poll the cache for stale objects (default 1m0s)
      --vfs-case-insensitive                   If a file name not found, find a case insensitive match
      --vfs-disk-space-total-size SizeSuffix   Specify the total space of disk (default off)
      --vfs-fast-fingerprint                   Use fast (less accurate) fingerprints for change detection
      --vfs-handle-caching Duration            Time to keep file handle and downloaders alive after last close (default 5s)
      --vfs-links                              Translate symlinks to/from regular files with a '.rclonelink' extension for the VFS
      --vfs-metadata-extension string          Set the extension to read metadata from
      --vfs-read-ahead SizeSuffix              Extra read ahead over --buffer-size when using cache-mode full
      --vfs-read-chunk-size SizeSuffix         Read the source objects in chunks (default 128Mi)
      --vfs-read-chunk-size-limit SizeSuffix   If greater than --vfs-read-chunk-size, double the chunk size after each chunk read, until the limit is reached ('off' is unlimited) (default off)
      --vfs-read-chunk-streams int             The number of parallel streams to read at once
      --vfs-read-wait Duration                 Time to wait for in-sequence read before seeking (default 20ms)
      --vfs-refresh                            Refreshes the directory cache recursively in the background on start
      --vfs-used-is-size rclone size           Use the rclone size algorithm for Used size
      --vfs-write-back Duration                Time to writeback files after last use when using cache (default 5s)
      --vfs-write-wait Duration                Time to wait for in-sequence write before giving error (default 1s)
      --volname string                         Set the volume name (supported on Windows and OSX only)
      --write-back-cache                       Makes kernel buffer writes before sending them to rclone (without this, writethrough caching is used) (not supported on Windows)
```

Options shared with other commands are described next.
See the [global flags page](/flags/) for global options not listed here.

### Filter Options

Flags for filtering directory listings

```text
      --delete-excluded                     Delete files on dest excluded from sync
      --exclude stringArray                 Exclude files matching pattern
      --exclude-from stringArray            Read file exclude patterns from file (use - to read from stdin)
      --exclude-if-present stringArray      Exclude directories if filename is present
      --files-from stringArray              Read list of source-file names from file (use - to read from stdin)
      --files-from-raw stringArray          Read list of source-file names from file without any processing of lines (use - to read from stdin)
      --files-from0 stringArray             Read list of source-file names from file using NUL as separator (use - to read from stdin)
  -f, --filter stringArray                  Add a file filtering rule
      --filter-from stringArray             Read file filtering patterns from a file (use - to read from stdin)
      --hash-filter string                  Partition filenames by hash k/n or randomly @/n
      --ignore-case                         Ignore case in filters (case insensitive)
      --include stringArray                 Include files matching pattern
      --include-from stringArray            Read file include patterns from file (use - to read from stdin)
      --max-age Duration                    Only transfer files younger than this in s or suffix ms|s|m|h|d|w|M|y (default off)
      --max-depth int                       If set limits the recursion depth to this (default -1)
      --max-size SizeSuffix                 Only transfer files smaller than this in KiB or suffix B|K|M|G|T|P (default off)
      --metadata-exclude stringArray        Exclude metadatas matching pattern
      --metadata-exclude-from stringArray   Read metadata exclude patterns from file (use - to read from stdin)
      --metadata-filter stringArray         Add a metadata filtering rule
      --metadata-filter-from stringArray    Read metadata filtering patterns from a file (use - to read from stdin)
      --metadata-include stringArray        Include metadatas matching pattern
      --metadata-include-from stringArray   Read metadata include patterns from file (use - to read from stdin)
      --min-age Duration                    Only transfer files older than this in s or suffix ms|s|m|h|d|w|M|y (default off)
      --min-size SizeSuffix                 Only transfer files bigger than this in KiB or suffix B|K|M|G|T|P (default off)
```

## See Also

<!-- markdownlint-capture -->
<!-- markdownlint-disable ul-style line-length -->

* [rclone serve](/commands/rclone_serve/)	 - Serve a remote over a protocol.


<!-- markdownlint-restore -->