Cloudflare R2 doesn't support range options like `Range: bytes=21-`.
This patch makes FixRangeOption turn a SeekOption into an absolute
RangeOption like this `Range: bytes=21-25` to interoperate with R2.
See: #5642
Before this change FixRangeOption was leaving `Range: bytes=21-`
alone, thus not fulfilling its contract of making Range requests
absolute.
As it happens this form isn't supported by Cloudflare R2.
After this change the request is normalised to `Range: bytes=21-25`.
See: #5642
Before this change rclone used presigned requests to upload single
part objects. This was because of a limitation in the SDK which didn't
allow non seekable io.Readers to be passed in.
This is incompatible with some S3 backends, and rclone wasn't adding
the `X-Amz-Content-Sha256: UNSIGNED-PAYLOAD` header which was
incompatible with other S3 backends.
The SDK now allows for this so rclone can use PutObject directly.
This sets the `X-Amz-Content-Sha256: UNSIGNED-PAYLOAD` flag on the PUT
request. However rclone will add a `Content-Md5` header if at all
possible so the body data is still protected.
Note that the old behaviour can still be configured if required with
the `use_presigned_request` config parameter.
Fixes#5422
Before this running `go mod tidy` caused the build to break because it
removed the dependency on golang.org/x/mobile and a command line tool
from this package is needed for the build.
This adds an explicit dependency which will mean the tool is always present.
This builds all windows binaries without CGO but with cmount.
cgofuse has a compile mode which works without CGO on Windows for
amd64/x86/arm64 architectures so switch to using that.
In this commit
f4c40bf79d mount: add --devname to set the device name sent to FUSE for mount display
The --devname parameter was added. However it was soon noticed that
attempting to mount via the rc gave this error:
mount helper error: fusermount: unknown option 'fsname'
mount FAILED: fusermount: exit status 1
This was because the DeviceName (and VolumeName) parameter was never
being initialised when the mount was called via the rc.
The fix for this was to refactor the rc interface so it called the
same Mount method as the command line mount which initialised the
DeviceName and VolumeName parameters properly.
This also fixes the cmd/mount tests which were breaking in the same
way but since they aren't normally run on the CI we didn't notice.
Fixes#6044
When this code was originally implemented os.UserCacheDir wasn't
public so this used a copy of the code. This commit replaces that now
out of date copy with a call to the now public stdlib function.
Before this change the cache backend was passing -1 into
rate.NewLimiter to mean unlimited transactions per second.
In a recent update this immediately returns a rate limit error as
might be expected.
This patch uses rate.Inf as indicated by the docs to signal no limits
are required.
Before this change if the timezone was omitted in a
--min-age/--max-age time specifier then rclone defaulted to a UTC
timezone.
This is documented as using the local timezone if the time zone
specifier is omitted which is a much more useful default and this
patch corrects the implementation to agree with the documentation.
See: https://forum.rclone.org/t/problem-utc-windows-europe-1-summer-problem/29917
Before this fix, rclone retries chunks of multipart uploads. However
if they had been partially received dropbox would reply with an
incorrect_offset error which rclone was ignoring.
This patch parses the new offset from the error response and uses it
to adjust the data that rclone sends so it is the same as what dropbox
is expecting.
See: https://forum.rclone.org/t/dropbox-rate-limiting-for-upload/29779
This commit switches Google Cloud Storage from the drive pacer to the
s3 pacer. The main difference between them is that the s3 pacer does
not limit transactions in the non-error case. This is appropriate for
a cloud storage backend where you pay for each transaction.
Before this fix `NewObject` could return a wrapped `fs.Object(nil)`
which caused a crash. This was caused by `wrapObject` returning a
`nil` `*Object` which was cast into an `fs.Object`.
This changes the interface of `wrapObject` so it returns an
`fs.Object` instead of a `*Object` and an error which must be checked.
This forces the callers to return a `nil` object rather than an
`fs.Object(nil)`.
See: https://forum.rclone.org/t/panic-in-hasher-when-mounting-with-vfs-cache-and-not-synced-data-in-the-cache/29697/11
Having a replace directive in go.mod causes "go get
github.com/rclone/rclone" to fail as it discussed in this Go issue:
https://github.com/golang/go/issues/44840
This is apparently how the Go team want go.mod to work, so this commit
hard forks github.com/jlaffaye/ftp into github.com/rclone/ftp so we
can remove the `replace` directive from the go.mod file.
Fixes#5810
This error was caused by renaming an open file.
When the file was renamed in the cache, the downloaders were cleared,
however the downloaders were not re-opened when needed again, instead
this error was generated.
This fix re-opens the downloaders if they have been closed by renaming
the file.
Fixes#5984
Before this change rclone send pre-1970 timestamps as negative
numbers. pCloud ignores these and sets them as todays date.
This change sends the timestamps as unsigned 64 bit integers (which is
how the binary protocol sends them) and pCloud accepts the (actually
negative) timestamp like this.
There has been a desire from more advanced rclone users to have regexp
filtering as well as the glob filtering.
This patch adds regexp filtering using this syntax `{{ regexp }}`
which is currently a syntax error, so is backwards compatibile.
This means regexps can be used everywhere globs can be used, and that
they also can be mixed with globs in the same pattern, eg `*.{{jpe?g}}`
Before this change, if the --max-duration limit was reached then
rclone would retry the sync as a fatal error wasn't raised.
This checks the deadline and raises a fatal error if necessary at the
end of the sync.
Fixes#6002
This stops the SFTP library issuing out of order writes which fixes
the problems uploading to `serve sftp` from the `sftp` backend.
This was fixes upstream in this pull request: https://github.com/pkg/sftp/pull/482Fixes#5806
Before this change the new multipart upload ETag checking code was
failing in the integration tests with Alibaba OSS.
Apparently Alibaba calculate the ETag in a different way to AWS.
This introduces a new provider quirk with a flag to disable the
checking of the ETag for multipart uploads.
Mulpart Etag checking has been enabled for all providers that we can
test for and work, and left disabled for the others.
Before this rclone ignored the ETag on multipart uploads which missed
an opportunity for a whole file integrity check.
This adds that check which means that we now check even harder that
multipart uploads have arrived properly.
See #5993
Before this change `rclone about swift:container` would show aggregate
info about all the containers, not just the one in use.
This causes a problem if container listing is disabled (for example in
the Blomp service).
This fix makes `rclone about swift:container` show only the info about
the given `container`. If aggregate info about all the containers is
required then use `rclone about swift:`.
See: https://forum.rclone.org/t/rclone-mount-blomp-problem/29151/18
Before this change, rclone supported authorizing for remote systems by
going to a URL and cutting and pasting a token from Google. This is
known as the OAuth out-of-band (oob) flow.
This, while very convenient for users, has been shown to be insecure
and has been deprecated by Google.
https://developers.googleblog.com/2022/02/making-oauth-flows-safer.html#disallowed-oob
> OAuth out-of-band (OOB) is a legacy flow developed to support native
> clients which do not have a redirect URI like web apps to accept the
> credentials after a user approves an OAuth consent request. The OOB
> flow poses a remote phishing risk and clients must migrate to an
> alternative method to protect against this vulnerability. New
> clients will be unable to use this flow starting on Feb 28, 2022.
This change disables that flow, and forces the user to use the
redirect URL flow. (This is the flow used already for local configs.)
In practice this will mean that instead of cutting and pasting a token
for remote config, it will be necessary to run "rclone authorize"
instead. This is how all the other OAuth backends work so it is a well
tested code path.
Fixes#6000
This allows a backend to have multiple aliases. These aliases are
hidden from `rclone config` and the command line flags are hidden from
the user. However the flags, environment varialbes and config for the
alias will work just fine.
Before this change, the device name was always the remote:path rclone
was configured with. However this can contain sensitive information
and it appears in the `mount` output, so `--devname` allows the user
to configure it.
See: https://forum.rclone.org/t/rclone-mount-blomp-problem/29151/11
Nick Craig-Wood