The auth proxy was only given the user and their password or public
key, so a proxy program had no way to restrict logins to particular
networks, or to record where an authentication attempt came from.
The JSON sent to the program now has a client_ip key holding the bare
IP the client connected from, with the port stripped so IPv6 arrives
as 2001:db8::1 rather than [2001:db8::1]:52344. An IPv4-mapped IPv6
address is reported as plain IPv4 so that a client arriving over a
dual-stack listener still matches IPv4 networks. The key is omitted
when the client has no IP address.
The IP is also mixed into the backend cache key. That is needed as the
program is only run on a cache miss, so a client from a
non-allowlisted address presenting valid credentials within the 5
minute cache lifetime would get a cache hit and be let in without the
program being consulted at all.
When --cert and --key were supplied TLS was only applied to the listener if
exactly one --addr was given. With two or more --addr flags every listener
without an explicit tls:// prefix silently served cleartext HTTP, so adding a
second --addr to an HTTPS server quietly disabled TLS on both.
Now when TLS is configured every listener serves TLS. An individual listener
can be prefixed with http:// to serve unencrypted HTTP on that address, and
tls:// still marks a listener as TLS explicitly. Using a tls:// address
without --cert and --key is now an error instead of silently serving
cleartext with an https:// URL.
Addresses GHSA-mfvx-7rcj-9m5g finding 3.
The rclone web GUI uses the Prefer header for sync/copy operations,
but the CORS middleware's preflight response did not include it in
Access-Control-Allow-Headers. This caused the browser to block
remote GUI copy requests with a CORS policy error:
Request header field prefer is not allowed by
Access-Control-Allow-Headers in preflight response.
Add 'Prefer' to the allowed headers list so remote GUI
access works correctly for file copy operations.
Fixes#9614
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
A Range header requesting a suffix longer than the object (e.g.
"bytes=-90407" against a 5 byte object) caused RangeOption.Decode to
compute a negative offset (size - End), which serve.Object then used
directly as a slice/seek offset and panicked with "slice bounds out of
range". FixRangeOption (used by backends like OneDrive/Box that lack
native suffix-range support) had the same root cause: it produced a
RangeOption with a negative Start, which Header() silently dropped,
turning the request into the wrong byte range instead of erroring or
serving the whole object.
Per RFC 7233 section 2.1, when the suffix-length exceeds the
representation size, the entire representation should be served.
Clamp the computed offset/start to 0 in both places.
Fixes#6310
The golang.org/x/net/http2/h2c package was deprecated in v0.54.0 in
favour of setting the http.Server Protocols field to enable unencrypted
HTTP/2.
This replaces the h2c.NewHandler wrapping added in e863f751f with
http.Server.Protocols, which is supported by the standard library
since Go 1.24.
Note that the stdlib only supports HTTP/2 prior-knowledge on cleartext
connections, not HTTP/1.1 Upgrade: h2c negotiation. In practice clients
use prior-knowledge or require TLS, so this should not affect users.
Add gzip compression for directory listings and text assets served over HTTP.
This reduces the rclone repository file listing from 40 kB to 8 kB and reduces
the rclone MANUAL.txt from 2.7 MB to 700 kB.
This makes listings and assets served across the network load faster.
The compression level of 5 should be a good balance between size and speed.
All user visible Durations should be fs.Duration rather than time.Duration. Suffix is then optional and defaults to s. Additional suffices d, w, M and y are supported, in addition to ms, s, m and h - which are the only ones supported by time.Duration. Absolute times can also be specified, and will be interpreted as duration relative to now.
This commit modernizes Go usage. This was done with:
go run golang.org/x/tools/gopls/internal/analysis/modernize/cmd/modernize@latest -fix -test ./...
Then files needed to be `go fmt`ed and a few comments needed to be
restored.
The modernizations include replacing
- if/else conditional assignment by a call to the built-in min or max functions added in go1.21
- sort.Slice(x, func(i, j int) bool) { return s[i] < s[j] } by a call to slices.Sort(s), added in go1.21
- interface{} by the 'any' type added in go1.18
- append([]T(nil), s...) by slices.Clone(s) or slices.Concat(s), added in go1.21
- loop around an m[k]=v map update by a call to one of the Collect, Copy, Clone, or Insert functions from the maps package, added in go1.21
- []byte(fmt.Sprintf...) by fmt.Appendf(nil, ...), added in go1.19
- append(s[:i], s[i+1]...) by slices.Delete(s, i, i+1), added in go1.21
- a 3-clause for i := 0; i < n; i++ {} loop by for i := range n {}, added in go1.22
Disabling the authentication for unix sockets makes it impossible to
use `rclone serve` behind a proxy that that communicates with rclone
via a unix socket.
Re-enabling the authentication should not have any effect on most
users of unix sockets as they do not set authentication up with a unix
socket anyway.
fs.CountError is called when an error is encountered. The method was
calling GlobalStats().Error(err) which incremented the error at the
global stats level. This led to calls to core/stats with group= filter
returning an error count of 0 even if errors actually occured.
This change requires the context to be provided when calling
fs.CountError. Doing so, we can retrieve the correct StatsInfo to
increment the errors from.
Fixes#5865
It fails to build on plan9, which is part of the rclone CI matrix, and
the PR fixing it upstream doesn't seem to be getting traction.
Stub it on our side, we can still remove this once it gets merged.
Instead of the listening addresses specified above, rclone will listen to all
FDs passed by the service manager, if any (and ignore any arguments passed by
`--{{ .Prefix }}addr`.
This allows rclone to be a socket-activated service. It can be configured as described in
https://www.freedesktop.org/software/systemd/man/latest/systemd.socket.html
It's possible to test this interactively through `systemd-socket-activate`,
firing of a request in a second terminal:
```
❯ systemd-socket-activate -l 8088 -l 8089 --fdname=foo:bar -- ./rclone serve webdav :local:test/
Listening on [::]:8088 as 3.
Listening on [::]:8089 as 4.
Communication attempt on fd 3.
Execing ./rclone (./rclone serve webdav :local:test/)
2024/04/24 18:14:42 NOTICE: Local file system at /home/flokli/dev/flokli/rclone/test: WebDav Server started on [sd-listen:bar-0/ sd-listen:foo-0/]
```
This changes log statements from log to fs package, which is required for --use-json-log
to properly make log output in JSON format. The recently added custom linting rule,
handled by ruleguard via gocritic via golangci-lint, warns about these and suggests
the alternative. Fixing was therefore basically running "golangci-lint run --fix",
although some manual fixup of mainly imports are necessary following that.
Windows webdav does an OPTIONS request on the root even when given a
path and if we return 404 here then Windows refuses to use the path.
This patch allows OPTIONS requests only on the root to fix this.
This affects all the HTTP servers.
Before this change it wasn't possible to see where transfers were
going from and to in core/stats and core/transferred.
When use in rclone mount in particular this made interpreting the
stats very hard.
makes the following go strings functions available to be used in custom templates; contains, hasPrefix, hasSuffix
added documentation for exported funcs
This adds an additional parameter to the creation of each flag. This
specifies one or more flag groups. This **must** be set for global
flags and **must not** be set for local flags.
This causes flags.md to be built with sections to aid comprehension
and it causes the documentation pages for each command (and the
`--help`) to be built showing the flags groups as specified in the
`groups` annotation on the command.
See: https://forum.rclone.org/t/make-docs-for-mortals-not-only-rclone-gurus/39476/
Some changes about test cases:
Because MiddlewareCORS will return early on OPTIONS request,
this middleware should only be used once at NewServer function.
Test cases should pass AllowOrigin config instead of adding
this middleware again.
A new test case was added to test CORS preflight request with
an authenticator. Preflight request should always return 200 OK
regardless of autentications.
Co-authored-by: yuudi <yuudi@users.noreply.github.com>
This change addresses two issues with commands that re-used
flags from common packages:
1) cobra.Command definitions did not include the command specific
prefix in doc strings.
2) Command specific flag prefixes were added after generating
command doc strings.
Before this change only serve http was Shutting down its server which
was causing other servers such as serve restic to leave behind their
unix sockets.
This change moves the finalisation to lib/http so all servers have it
and removes it from serve http.
Fixes#6648
Sune MølgaardandNick Craig-Wood
am-at-enrollvbandGitHub
Amit MishraandNick Craig-Wood
TheBabuandNick Craig-Wood
Leon BrocardandGitHub
Romāns PotašovsandNick Craig-Wood
FTCHDandNick Craig-Wood
albertony
viochaandNick Craig-Wood
iTroozandGitHub
dougalandNick Craig-Wood
Moises LimaandGitHub
Moises LimaandNick Craig-Wood
Benjamin LegrandandNick Craig-Wood
Florian KlinkandNick Craig-Wood
SunnyandGitHub
Alen ŠiljakandNick Craig-Wood
Gabriel EspinozaandGitHub
Nikita ShoshinandNick Craig-Wood
yuudiandNick Craig-Wood
Peter FernandNick Craig-Wood
Zach KippandNick Craig-Wood