The sync report flags (--combined, --missing-on-src, --missing-on-dst,
--match, --differ, --error and --dest-after) were only wired up in the
CLI commands so there was no way to get these reports over the rc or
from librclone.
This adds boolean parameters of the same names as operations/check
(combined, missingOnSrc, missingOnDst, match, differ, error and
destAfter) to sync/sync, sync/copy and sync/move. Each requested
report is returned as an array of strings in the output, just as
operations/check does. All default to off so existing callers see no
change in the output.
To share the code between the CLI and the rc the report writer helper
from operations/check is exported as operations.RcReportWriter, the
lsf defaults for --dest-after are moved into
operations.NewSyncLoggerOpt and the listing setup and --no-traverse
warnings from operationsflags.ConfigureLoggers into LoggerOpt.Init.
When syncing to a backend which supports directory modtimes, a
directory which needed its modtime updated and which had files
transferred into it would get its modtime set twice - once when the
directory was checked and once in the pass at the end of the sync.
Now, when the end of sync pass is in use (which it is for all default
syncs), directories which need their modtime (or metadata) updating
are marked for that pass instead of being updated immediately. This
halves the number of directory modtime updates in a typical sync and
makes the "Updated dirs" stat count each directory once.
Syncs which update lots of directories (eg to sftp) could spend a long
time setting directory modification times, making directories or
removing directories with no feedback in the --progress display or
stats, making rclone appear to have hung.
This shows directory operations (setting modtime, updating metadata,
making and removing directories) in the Checking section of the stats
and counts them as checks, in the same way file deletes are shown.
Allow --order-by to rank files using comma-separated rclone path globs. Patterns are evaluated in order, unmatched files are placed last, and path ordering makes ties deterministic.
Fixes#3975
Sync refuses to delete files when the global error stats are non-zero
so a single backend error in one transform test made every following
transform test in the same test binary fail with "not deleting files
as there were IO errors". Reset the stats at the start of each test.
ownCloud does not carry the checksum over to the destination of a
server side copy and refuses attempts to set it afterwards, so the
destination legitimately has no hash. The logger vs lsf check
compared the predicted hash against the empty hash and failed.
Treat an empty hash in the listing as unknown rather than wrong,
matching how sync itself compares hashes.
When doing a copy (no delete mode) without a logger, the destination
listing can be cancelled as soon as the source listing finishes, since
dst-only entries won't be processed.
This is particularly beneficial with --fast-list where the dst listing
may fetch the entire directory tree upfront via ListR. Cancelling it
early avoids waiting for a potentially large listing that won't be used.
Adds NoProcessDstOnly flag to March which, when set, cancels the dst
listing context once the source channel is exhausted in matchListings.
Fixes#9226
operations.NeedTransfer's equality check may have deleted pair.Dst as
a precursor to re-uploading it if SetModTime returns
ErrorCantSetModTimeWithoutDelete (e.g. Dropbox). If so skip the eager
delete of the destination if --fix-case will rename it to a different
name. The rename itself replaces the destination, and any subsequent
re-upload happens at the correctly-cased path.
See: #8881
This reverts commit de67f29b3f.
This solved the original Dropbox "from_lookup/not_found" failure, but
broke --fix-case on case-sensitive backends that update modtime via a
server-side copy (such as S3 on Cloudflare R2).
The TransformFile tests in fs/sync call operations.TransformFile
immediately after MoveDir. On eventually-consistent backends the
internal NewObject lookup can momentarily fail with "object not
found", making the tests flaky.
This wraps the two operations.TransformFile calls in TestTransformFile
and TestManualTransformFile with fstest.Retry
When --fix-case was used (e.g. by bisync) on backends that can't set
modification times in place - such as Dropbox - files whose content
matched but whose modtimes differed would fail to rename with a
"from_lookup/not_found" error and abort the operation.
This happened because operations.NeedTransfer was called before the
fix-case rename. NeedTransfer's equality check would delete the
destination as a precursor to re-uploading it (the standard way to
update a modtime on these backends), so by the time the rename ran the
file no longer existed on the remote.
Fix by running the fix-case rename first, so that any subsequent
delete/re-upload happens at the correctly-cased destination path.
See: #8881
Replace AuthRequired bool with NoAuth bool on the rc.Call struct and
flip the auth check logic. Previously endpoints were unauthenticated
by default and had to opt in with AuthRequired: true, which led to
security vulnerabilities when developers forgot to set the flag.
Now all endpoints require authentication by default. Only explicitly
safe read-only endpoints are marked with NoAuth: true:
- rc/noop
- rc/error
- rc/list
- core/version
- core/stats
- core/group-list
- core/transferred
- core/du
- cache/stats
- vfs/list
- vfs/stats
- vfs/queue
- job/status
- job/list
See GHSA-25qr-6mpr-f7qx, GHSA-jfwf-28xr-xw6q
There are some backends (like PikPak) that advertise a precision of
fs.ModTimeNotSupported but do actually return a modtime when asked. In the case
of PikPak, it is because the modtime can be read but not written, and is not
considered reliable enough to use for syncing.
Before this change, testLoggerVsLsf got confused in this scenario (expected a
blank modtime but got non-blank). Adding to the confusion, it only reaches this
code if the backend happens to support md5 hashes, and the fsrc and fdst have
the same precision.
This change fixes the issue by setting the modtime string on both sides to
"none" in this scenario. Note that we can't use "" (blank) because
(operations.ListFormat).AddModTime would replace that with "2006-01-02 15:04:05".
Before this change, two tests (TestServerSideCopyOverSelf and
TestServerSideMoveOverSelf) were checking the wrong Fs in the call to
testLoggerVsLsf. This fixes it by making sure we are testing the same two Fs's
we synced.
All user visible Durations should be fs.Duration rather than time.Duration. Suffix is then optional and defaults to s. Additional suffices d, w, M and y are supported, in addition to ms, s, m and h - which are the only ones supported by time.Duration. Absolute times can also be specified, and will be interpreted as duration relative to now.
This ocurred whenever there were more than 100 files in the source due
to the output channel filling up.
The fix is not to use list.NewSorter but take more care to output the
dst objects in the same order the src objects are delivered. As the
src objects are delivered sorted, no sorting is needed.
In order not to cause another deadlock, we need to send nil dst
objects which is safe since this adjusts the termination conditions
for the channels.
Thanks to @jeremy for the test script the Go tests are based on.
In convmv, src and dst can point to the same directory. Unless a dir's name is
changing, we should leave it alone and not attempt to copy its metadata to
itself.
lib/transform adds the transform library, supporting advanced path name
transformations for converting and renaming files and directories by applying
prefixes, suffixes, and other alterations.
It also adds the --name-transform flag for use with sync, copy, and move.
Multiple transformations can be used in sequence, applied in the order they are
specified on the command line.
By default --name-transform will only apply to file names. The means only the leaf
file name will be transformed. However some of the transforms would be better
applied to the whole path or just directories. To choose which which part of the
file path is affected some tags can be added to the --name-transform:
file Only transform the leaf name of files (DEFAULT)
dir Only transform name of directories - these may appear anywhere in the path
all Transform the entire path for files and directories
Example syntax:
--name-transform file,prefix=ABC
--name-transform dir,prefix=DEF
This commit modernizes Go usage. This was done with:
go run golang.org/x/tools/gopls/internal/analysis/modernize/cmd/modernize@latest -fix -test ./...
Then files needed to be `go fmt`ed and a few comments needed to be
restored.
The modernizations include replacing
- if/else conditional assignment by a call to the built-in min or max functions added in go1.21
- sort.Slice(x, func(i, j int) bool) { return s[i] < s[j] } by a call to slices.Sort(s), added in go1.21
- interface{} by the 'any' type added in go1.18
- append([]T(nil), s...) by slices.Clone(s) or slices.Concat(s), added in go1.21
- loop around an m[k]=v map update by a call to one of the Collect, Copy, Clone, or Insert functions from the maps package, added in go1.21
- []byte(fmt.Sprintf...) by fmt.Appendf(nil, ...), added in go1.19
- append(s[:i], s[i+1]...) by slices.Delete(s, i, i+1), added in go1.21
- a 3-clause for i := 0; i < n; i++ {} loop by for i := range n {}, added in go1.22
Before, after a sync, only file modtimes were updated when not using
--copy-empty-src-dirs. This ensures modtimes are updated to match the source
folder, regardless of copyEmptySrcDir. The flag --no-update-dir-modtime
(which previously did nothing) will disable this.
This adds tests to check dir modtimes are updated from source
when syncing even if they've changed in the destination.
This should work both with and without --copy-empty-src-dirs.
Before this change the logic which makes sure we create all
directories could get confused with directories which started with
slashes and get into an infinite loop consuming 100% of the CPU.
fs.CountError is called when an error is encountered. The method was
calling GlobalStats().Error(err) which incremented the error at the
global stats level. This led to calls to core/stats with group= filter
returning an error count of 0 even if errors actually occured.
This change requires the context to be provided when calling
fs.CountError. Doing so, we can retrieve the correct StatsInfo to
increment the errors from.
Fixes#5865
Before this change, macOS-specific metadata was not preserved by rclone, even for
local-to-local transfers (it does not use the "user." prefix, nor is Mac metadata
limited to xattrs.) Additionally, rclone did not take advantage of APFS's native
"cloning" functionality for fast and deduplicated transfers.
After this change, local (on macOS only) supports "server-side copy" similarly to
other remotes, and achieves this by using (when possible) macOS's native APFS
"cloning", which is the same underlying mechanism deployed when a user
duplicates a file via the Finder UI. This has several advantages over the
previous behavior:
- It is extremely fast (even large files can be cloned instantly)
- It is very efficient in terms of storage, as it automatically deduplicates when
possible (i.e. so that having two identical files does not consume more storage
than having just one.) (The concept is similar to a "hard link", but subsequent
modifications will not affect the original file.)
- It preserves Mac-specific metadata to the maximum degree, including not only
xattrs but also metadata not easily settable by other methods, including Finder
and Spotlight params.
When server-side "clone" is not available (for example, on non-APFS volumes), it
falls back to server-side "copy" (still preserving metadata but using more disk
storage.) It is only used when both remotes are local (and not wrapped by other
remotes, such as crypt.) The behavior of local on non-mac systems is unchanged.
Before this fix we attempted to copy metadata to SFTP backends despite
them not being capable of it.
This fixes the problem by making the need to copy metadata explicit
rather than implicit in a value being present or not.
Before this change we synced directories regardless if the source
directory existed. It is irrelevant whether the source directory
exists or not, what we need to know is has the directory been
modified.
Co-authored-by: nielash <nielronash@gmail.com>
Before this change we used the same datastructure for managing empty
directories for both --create-empty-src-dirs in sync/copy/move and for
the --delete-empty-src-dirs flag in move.
These two uses are subtly incompatible and this change uses a separate
datastructure for both uses. This makes it more accurate and easier to
understand.
Before this change when the sync routine attempted to normalise a
case, say from "FiLe.txt" to "file.txt" this caused a 400 Bad Request
error:
> This copy request is illegal because it is trying to copy an object
> to itself without changing the object's metadata, storage class,
> website redirect location or encryption attributes.
This was caused by passing the same object as the source and
destination to the move routine, whereas the destination object had a
different case and didn't exist, so should have been passed as nil.
See: https://github.com/rclone/rclone/pull/7743#discussion_r1557345906
Some backends (like s3, swift, gcs, azureblob) don't have directories
(this can be overridden on some using the directory markers feature).
It therefore makes no sense to sync directory times from them as they
will all be a value made up by rclone (--default-time)
We use the feature flag CanHaveEmptyDirectories to mark backends
without real directory support and disable the directory modification
time syncing on those.
Before this change, directory modtimes (and metadata) were always synced from
src to dst, even if already in sync (i.e. their modtimes already matched.) This
potentially required excessive API calls, made logs noisy, and was potentially
problematic for backends that create "versions" or otherwise log activity
updates when modtime/metadata is updated.
After this change, a new DirsEqual function is added to check whether dirs are
equal based on a number of factors such as ModifyWindow and sync flags in use.
If the dirs are equal, the modtime/metadata update is skipped.
For backends that require setDirModTimeAfter, the "after" sync is performed only
for dirs that could have been changed by the sync (i.e. dirs containing files
that were created/updated.)
Note that dir metadata (other than modtime) is not currently considered by
DirsEqual, consistent with how object metadata is synced (only when objects are
unequal for reasons other than metadata).
To sync dir modtimes and metadata unconditionally (the previous behavior), use
--ignore-times.
Nick Craig-Wood
Shurong CaoandNick Craig-Wood
yyandGitHub
dougalandGitHub
russcossandGitHub
nielashandNick Craig-Wood
albertonyandGitHub
ll3006andNick Craig-Wood
Benjamin LegrandandNick Craig-Wood